Cisco ONS 15454 DWDM Installation And Operation Manual page 54

Tasks
DLP-G240 Change Line Threshold Settings for MXP_MR_2.5G
DLP-G241 Change Optical Thresholds Settings for MXP_MR_2.5G
DLP-G242 Change External Alarms Using the AIC Card
DLP-G243 Change External Controls Using the AIC Card
DLP-G244 Change Orderwire Settings Using the AIC Card
DLP-G245 Change External Alarms Using the AIC-I Card
DLP-G246 Change External Controls Using the AIC-I Card
DLP-G247 Change AIC-I Card Orderwire Settings
DLP-G248 Use the Reinitialization Tool to Clear the Database and Upload Software (Windows)
DLP-G249 Use the Reinitialization Tool to Clear the Database and Upload Software (UNIX)
DLP-G250 Reset the TCC2 Card
DLP-G251 Reset DWDM Cards Using CTC
DLP-G252 Place TXP and MXP Ports Out of Service
DLP-G253 Place OSCM and OSC-CSM Ports Out of Service
DLP-G254 Place OPT-BST and OPT-BST Ports Out of Service
DLP-G255 Place 32MUX-0, 32WSS, 32DMX-O, and 32DMX Ports Out of Service
DLP-G256 Place 4MD-xx.x Ports Out of Service
DLP-G257 Place Band OADM Ports Out of Service
DLP-G258 Place Channel OADM Ports Out of Service
DLP-G259 Manual or Force Switch the Node Timing Reference
DLP-G260 Clear a Manual or Force Switch on a Node Timing Reference
DLP-G261 Scope and Clean Fiber Connectors and Adapters with Alcohol and Dry Wipes
DLP-G262 Clean Fiber Connectors with CLETOP
DLP-G263 Clean the Fiber Adapters
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
liv
and MXPP_MR_2.5G Cards
and MXPP_MR_2.5G Cards
11-10
11-11
11-17
11-34
10-73
10-75
10-77
10-78
10-79
10-80
10-81
10-82
11-14
11-15
11-16
11-18
11-18
11-24
11-25
11-34
11-6
11-8
11-16
11-33
September 2004