Dlp-G50 Delete A Node From The Current Session Or Login Group; Dlp-G51 Delete A Node From A Specified Login Node Group - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 2 Connect the PC and Log into the GUI
After a few seconds, the new node appears on the network view map.
Return to your originating procedure (NTP).
Step 5

DLP-G50 Delete a Node from the Current Session or Login Group

Purpose
Tools
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
From the View menu, choose Go to Network View.
Step 1
Click the node that you want to delete.
Step 2
From the CTC File menu, click Delete Selected Node.
Step 3
After a few seconds, the node disappears from the network view map.
Return to your originating procedure (NTP).
Step 4

DLP-G51 Delete a Node from a Specified Login Node Group

Purpose
Tools
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
From the CTC Edit menu, choose Preferences.
Step 1
In the Preferences dialog box, click the Login Node Groups tab.
Step 2
Click the login node group tab containing the node you want to remove.
Step 3
Click the node you want to remove, then click Remove.
Step 4
Click OK.
Step 5
September 2004
DLP-G50 Delete a Node from the Current Session or Login Group
This task removes a node from the current CTC session or login node
group. To remove a node from a login node group that is not the current
one, see "DLP-G51 Delete a Node from a Specified Login Node Group"
task on page 2-31.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Provisioning or higher
This task removes a node from a specified login node group. To remove a
node from the current login node group, see
the Current Session or Login Group" task on page
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Provisioning or higher
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
"DLP-G50 Delete a Node from
2-31.
2-31