Cisco ONS 15454 DWDM Installation And Operation Manual page 67

Hide thumbs Also See for ONS 15454 DWDM:

Table of Contents

Install the Shelf and Common Control Cards

Only use the power cables that are designed to be used with ONS 15454 ETSI. They are sold separately.

User-Supplied Equipment (ETSI)

The following materials and tools are required for installation but are not supplied with the

ONS 15454 ETSI:

Ring runs are not provided by Cisco and can hinder side-by-side shelf installation where space is limited.

Tools Needed (ETSI)

To install the ONS 15454 ETSI, you need the following tools.

September 2004

M6 x 20 mm pan-head Phillips screws (8)

Tie wraps 0.125-inch (3.2 mm) W x 6.0-inch (152 mm) L (24)

ESD wrist strap (disposable) (1)

Pinned Allen key for front door (1)

Hex key 3-mm long arm (1)

Bottom brackets for the fan-tray air filter

Cable assembly, Ethernet, RJ-45 (1)

Power cable (from fuse and alarm panel to MIC-A/P and MIC-C/T/P) (2)

Equipment rack (ETSI rack, 2200 mm [86.6 inch] H x 600 mm [23.6 inch] W

x 300 mm [11.8 inch] D)

Fuse and alarm panel

Copper ground cable 13.3-mm² (#6 AWG) stranded, specified for up to 90 degrees Celsius

(194 degrees Fahrenheit)

Alarm cable pairs for all alarm connections, 0.51 mm² or 0.64 mm² (#22 or #24 AWG), solid-tinned

Single-mode SC fiber jumpers with UPC polish (55 dB or better) for optical cards

Coaxial cable terminated with 1.0/2.3 miniature coax connectors for FMEC cards

Shielded building integrated timing supply (BITS) clock coaxial cable terminated with

1.0/2.3 miniature coax connectors

#2 Phillips screwdriver

Medium slot-head screwdriver

Small slot-head screwdriver

Video fiber connector inspection instrument

CLETOP cleaning cassette

Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7

Required Tools and Equipment (ETSI)