Table 10-35 Mxp_2.5G_10G Or Mxp_2.5G_10E Muxponder Card G.709 Threshold Settings - Cisco ONS 15454 DWDM Installation And Operation Manual

Hide thumbs Also See for ONS 15454 DWDM:
Table of Contents

Advertisement

Chapter 10
Change Card Settings
Table 10-34 MXP_2.5G_10G or MXP_2.5G_10E Muxponder Card Line OTN Settings (continued)
Parameter
SD BER
Asynch/Synch
Mapping
Table 10-35

Table 10-35 MXP_2.5G_10G or MXP_2.5G_10E Muxponder Card G.709 Threshold Settings

Parameter
Port
ES
SES
UAS
BBE
FC
Table 10-36
September 2004
DLP-G228 Change Line OTN Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards
Description
Sets the signal degrade bit error rate.
The MXP_2.5G_10E can perform
standard ODU multiplexing according to
ITU-T G.709. The card uses this to
aggregate the four OC-48 client signals.
describes the values on the Provisioning > OTN > OTN G.709 Thresholds tab.
Description
Display only. Port number
Errored seconds
Severely errored seconds. Two types of
thresholds can be asserted. Selecting the
SM (OTUk) radio button selects FEC and
overhead management and performance
monitoring using OTUk. Selecting the
PM radio button selects path performance
monitoring using ODUk.
Unavailable seconds
Background block errors
Failure counter
describes the values on the Provisioning > OTN > FEC Thresholds tab.
Options
1E-5
1E-6
1E-7
1E-8
1E-9
ODU Multiplex
Options
5
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
or for SM (OTUk) or PM (ODUk). Select
a bullet and click Refresh.
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
or for SM (OTUk) or PM (ODUk). Select
a bullet and click Refresh.
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
or for SM (OTUk) or PM (ODUk). Select
a bullet and click Refresh.
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
or for SM (OTUk) or PM (ODUk). Select
a bullet and click Refresh.
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
or for SM (OTUk) or PM (ODUk). Select
a bullet and click Refresh.
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
10-53

Advertisement

Table of Contents
loading

Table of Contents