Figure 3-8 Cisco Metroplanner Site Dialog Window - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 3 Turn Up a Node
Step 4 In Cisco MetroPlanner, display the Site Dialog window for the node you are provisioning. A site
installation example is shown in
Figure 3-8
Arrange the CTC and the Cisco MetroPlanner windows so you can view both windows simultaneously.
Step 5
In CTC node view, right-click an empty slot where you will install a card.
Step 6
Step 7 From the Add Card popup menu, choose the card type that will be installed based on the Cisco
MetroPlanner Site Dialog window. Only cards that can be installed in the slot appear in the Add Card
popup menu.
Note
Repeat
Step 8
provisioned in CTC.
Stop. You have completed this procedure.
September 2004
Cisco MetroPlanner Site Dialog Window
When you preprovision a slot, the card appears purple in the CTC shelf graphic, rather than
white when a card is installed in the slot. NP (not present) on the card graphic indicates that the
card is not physically installed.
Step 7 until all the cards shown in the Cisco MetroPlanner the Site Dialog window are
Figure 3-8.
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
NTP-G29 Preprovision a Slot
3-25