Ntp-G70 Suppress Alarms Or Discontinue Alarm Suppression; Dlp-G129 Suppress Alarm Reporting - Cisco ONS 15454 DWDM Installation And Operation Manual

Hide thumbs Also See for ONS 15454 DWDM:
Table of Contents

Advertisement

Chapter 7
Manage Alarms

NTP-G70 Suppress Alarms or Discontinue Alarm Suppression

Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Step 1
Complete the
Step
Complete the
Step 2
autonomous messages that clear specific raised alarms and cause suppressed alarms to appear in the
Conditions window.
Note
Complete the
Step 3
suppression and resume normal alarm reporting.
Stop. You have completed this procedure.

DLP-G129 Suppress Alarm Reporting

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
If multiple CTC/TL1 sessions are open, suppressing alarms in one session suppresses the alarms in all
Caution
other open sessions.
November 2004
Use this procedure to prevent alarms from being reported for a port, card,
or node in circumstances when an alarm or condition is known to exist but
you do not want to include it in the display. This procedure also provides a
link to a task that explains how to resume normal alarm reporting by
discontinuing the suppression.
None
As needed
Onsite or remote
Provisioning or higher
"DLP-G46 Log into CTC" task on page
2.
"DLP-G129 Suppress Alarm Reporting" task on page 7-33
Suppressing one or more alarms prevents them from appearing in Alarm or History windows or
in any other clients. The suppress command causes CTC to display them in the Conditions
window with their severity, their severity color code, and service-affecting status.
"DLP-G130 Discontinue Alarm Suppression" task on page 7-35
This task suppresses the reporting of ONS 15454 alarms at the node, card,
or port level.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Provisioning or higher
NTP-G70 Suppress Alarms or Discontinue Alarm Suppression
2-25. If you are already logged in, continue with
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
to enable the node to send
to discontinue alarm
7-33

Advertisement

Table of Contents
loading

Table of Contents