Dlp-G144 Enable/Disable Otn Itu-T G.709 Performance Monitoring - Cisco ONS 15454 DWDM Installation And Operation Manual

DLP-G144 Enable/Disable OTN ITU-T G.709 Performance Monitoring

Stop. You have completed this procedure.
DLP-G144 Enable/Disable OTN ITU-T G.709 Performance Monitoring
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the card you want to monitor. The card view appears.
Step 1
Click the Provisioning > OTN > OTN Lines tabs
Step 2
Figure 8-6
Provisioning
OTN Lines tab
Step 3 Make an ITU-T G.709 selection based on the following rules:
•
•
Click Apply.
Step 4
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
8-16
OTN Lines Tab for Enabling/Disabling OTN ITU-T G.709 Performance Monitoring
Card View
tab
OTN tab
Unchecked disables ITU-T G.709 for that port (default).
Checked enables ITU-T G.709 for that port.
This task enables or disables OTN ITU-T G.709 monitoring of near-end
or far-end performance on a card and port during selected time intervals
to detect possible problems.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Provisioning or higher
(Figure
G.709 OTN
check box
Chapter 8
8-6).
Monitor Performance
Apply Help
button button
September 2004