Dlp-G194 Delete User-Multiple Nodes; Dlp-G195 Log Out A User-Single Node - Cisco ONS 15454 DWDM Installation And Operation Manual

DLP-G194 Delete User—Multiple Nodes
DLP-G194 Delete User—Multiple Nodes
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
You cannot delete a user who is currently logged in. To log out a user, you can complete the
Note
Log Out a User—Multiple Nodes" task on page
option in the Delete User dialog box.
CTC will allow you to delete other Superusers if one Superuser remains. For example, you can delete
Note
the CISCO15 user if you have created another Superuser. Use this option with caution.
From the View menu, choose Go to Network View.
Step 1
Click the Provisioning > Security tabs. Highlight the name of the user you want to delete.
Step 2
Click Delete. The Delete User dialog box appears.
Step 3
In the Select Applicable Nodes area, uncheck any nodes where you do not want to delete this user.
Step 4
Step 5 Click OK. A User Deletion Results confirmation dialog box appears.
Click OK to acknowledge the changes. Confirm that the changes appear; if not, repeat the task.
Step 6
Return to your originating procedure (NTP).
Step 7
DLP-G195 Log Out a User—Single Node
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Security > Active Logins tabs.
Step 1
Choose the user that you want to log out and click Logout.
Step 2
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
9-40
This task deletes an existing user from multiple nodes.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Superuser
9-41, or you can choose the "Logout before delete"
This task logs out a user from a single node.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Superuser
Chapter 9 Manage the Node
"DLP-G196
September 2004