Dlp-G56 Provision Ip Settings - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 3 Turn Up a Node
Complete the
Step 1
Step
Complete the
Step 2
subnet mask, default router, DHCP server, IIOP listener port, and proxy server settings.
Tip
If static routes are needed, complete the
Step 3
information about static routes, see
If the ONS 15454 is connected to a LAN or WAN that uses OSPF, complete the
Step 4
Change Open Shortest Path First Protocol" task on page
Step 5 If the ONS 15454 is connected to a LAN or WAN that uses RIP, complete the
Change Routing Information Protocol" task on page
Stop. You have completed this procedure.

DLP-G56 Provision IP Settings

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
All network changes should be approved by your network (or LAN) administrator.
Caution
In node view, click the Provisioning > Network tabs.
Step 1
Complete the following information in the fields listed:
Step 2
•
•
•
September 2004
"DLP-G46 Log into CTC" task on page
2.
"DLP-G56 Provision IP Settings" task on page 3-9
If you cannot log into the node, you can change its IP address, default router, and network mask
by using the LCD on the ONS 15454 fan-tray assembly (unless LCD provisioning is
suppressed). See the "DLP-G57 Set the IP Address, Default Router, and Network Mask Using
the LCD" task on page 3-13
other network settings.
This task provisions IP settings, which includes the IP address, default
router, DHCP access, firewall access, and proxy server settings for an
ONS 15454 node.
None
DLP-G46 Log into CTC, page 2-25
Required
Onsite or remote
Superuser
IP Address—Type the IP address assigned to the ONS 15454 node.
Suppress CTC IP Display—Check this check box if you want to prevent the node IP address from
being displayed in CTC to users with Provisioner, Maintenance, or Retrieve security levels. (The IP
address suppression is not applied to users with Superuser security level.)
LCD IP Display—Choose one of the following:
2-25. If you are already logged in, continue with
for instructions. However, you cannot use the LCD to provision any
"DLP-G58 Create a Static Route" task on page
Chapter 19, "CTC Connectivity Reference."
3-16.
3-18.
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
DLP-G56 Provision IP Settings
to provision the ONS 15454 IP address,
3-15. For more
"DLP-G59 Set Up or
"DLP-G60 Set Up or
3-9