Ntp-G108 Viewing The Audit Trail Records - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 11 Maintain the Node
Step 4 Click Apply.
In the confirmation dialog box, click Yes.
Step 5
Click the Provisioning > Optical Chn > Parameters tabs.
Step 6
Under Admin State, choose OOS,DSLB for each port that does not have an OOS-MA,DSLB service
Step 7
state.
Click Apply.
Step 8
In the confirmation dialog box, click Yes.
Step 9
Return to your originating procedure (NTP).
Step 10

NTP-G108 Viewing the Audit Trail Records

Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
trail log. If you are already logged in, continue with
In the node view, click the Maintenance > Audit tabs.
Step 2
Click Retrieve.
Step 3
A window containing the most recent audit trail records appears as shown in
September 2004
This procedure describes how to view audit trail records.
None
As needed
Onsite or remote
Provisioning
"DLP-G46 Log into CTC" task on page 2-25 at the node where you want to view the audit
Step 2.
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
NTP-G108 Viewing the Audit Trail Records
Figure 11-6.
11-19