Figure 8-12 Statistics Tab On The Card View Performance Window - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 8 Monitor Performance
Step 2 Click the Performance > Payload PM > Statistics tabs

Figure 8-12 Statistics Tab on the Card View Performance Window

Card View
Performance tab
Statistics tab
Payload PM tab
Click Refresh. Performance monitoring statistics appear for each port on the card.
Step 3
View the PM parameter names that appear in the Param column. The current PM parameter values appear
Step 4
in the Port # columns. For PM parameter definitions, refer to the Cisco ONS 15454 SONET and DWDM
Troubleshooting Guide.
Note
Return to your originating procedure (NTP).
Step 5
September 2004
Refresh
button
To refresh, reset, or clear PM counts, see the
page 8-2.
(Figure
Auto-refresh Baseline
menu button
"NTP-G73 Change the PM Display" procedure on
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
DLP-G149 View Payload Statistics PM Parameters
8-12).
Clear Help
button button
8-23