Ntp-G64 View Alarms, History, Events, And Conditions - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 7 Manage Alarms
Spreadsheet and database management programs also allow you to manage the exported data.
Note
The export operation applies to all tabular data except:
•
•
•
•
•
•
•
•
•
•
•
•
Click OK.
Step 6
In the Save dialog box, enter a name in the File name field using one of the following formats:
Step 7
•
•
•
Navigate to a directory where you want to store the file.
Step 8
Click OK.
Step 9
Repeat the task for each window that you want to export.
Step 10
Return to your originating procedure (NTP).
Step 11

NTP-G64 View Alarms, History, Events, and Conditions

Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
November 2004
An exported file cannot be opened in CTC.
Provisioning > General > General and Power Monitor windows
Provisioning > Network > General and RIP windows
Provisioning > Security > Policy, Access, and Legal Disclaimer windows
Provisioning > SNMP window
Provisioning > Timing window
Provisioning > UCP > Node window
Provisioning > WDM-ANS > Provisioning window
Maintenance > Cross-Connect > Cards window
Maintenance > Database window
Maintenance > Diagnostic window
Maintenance > Protection window
Maintenance > Timing > Source and Report windows
filename.html for HTML files
filename.csv for CSV files
filename.tsv for TSV files
Use this procedure to view current or historical alarms and conditions for
a card, node, or network. This information is useful for monitoring and
troubleshooting hardware and software events.
None
As needed
Onsite or remote
Provisioning or higher
NTP-G64 View Alarms, History, Events, and Conditions
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
7-5