Before You Begin - Cisco ONS 15454 DWDM Installation And Operation Manual

Manage Alarms
This chapter contains the procedures for viewing and managing the alarms and conditions on a
Cisco ONS 15454.
Cisco Transport Controller (CTC) detects and reports alarms generated by the Cisco ONS 15454 and the
Optical Networking System (ONS) network. You can use CTC to monitor and manage alarms at a card,
node, or network level. You can also view alarm counts on the LCD front panel.
Unless otherwise specified, "ONS 15454" refers to both ANSI and ETSI shelf assemblies.
Note

Before You Begin

This section lists the chapter procedures (NTPs). Turn to a procedure for applicable tasks (DLPs).
1.
2.
3.
4.
5.
6.
7.
8.
November 2004
NTP-G63 Document Existing Provisioning, page
or export node data.
NTP-G64 View Alarms, History, Events, and Conditions, page
needed to see alarms and conditions occurring on the node and a complete history of alarm and
condition messages.
NTP-G65 Delete Cleared Alarms from Display, page
delete cleared alarm information.
NTP-G66 View Alarm-Affected Circuits, page
circuits that are affected by a particular alarm or condition.
NTP-G67 View Alarm Counts on the LCD for a Node, Slot, or Port, page
procedure as needed to see a statistical count of alarms that have occurred for a slot or port.
NTP-G68 Create, Download, and Assign Alarm Severity Profiles, page
procedure as needed to change the default severity for certain alarms, to assign the new severities to
a port, card, or node, and to delete alarm profiles.
NTP-G69 Enable, Modify, or Disable Alarm Severity Filtering, page
procedure as needed to enable, disable, or modify alarm severity filtering in the Conditions, Alarms,
or History screens at the node or network level.
NTP-G70 Suppress Alarms or Discontinue Alarm Suppression, page
procedure as needed to suppress reported alarms at the port, card, or node level and to disable the
suppress command to resume normal alarm reporting.
C H A P T E R
7-2—Complete this procedure as needed to print
7-13—Complete this procedure as needed to
7-14—Complete this procedure as needed to find
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
7-5—Complete this procedure as
7-16—Complete this
7-17—Complete this
7-29—Complete this
7-33—Complete this
7
7-1