Ruijie Networks RG-S2600E Series Cli Reference Manual page 1107

S2600E CLI Reference Guide
Default
configuration
Command
mode
Usage
Guideline
Examples
Related
commands
7.1.39 trigger
Use this command to configure the trigger attributes of the policy in SEM
configuration mode.
trigger
[correlate-period-start
correlate-period-value] [delay delay-value] [maxrun maxruntime-number]
no trigger
Parameter
description
Chapter 7 SEM Configuration Commands
By default, the SEM scheduler is not suspended.
Global configuration mode
Note: the running thread will not be influenced by the
scheduler suspending, but continue running until the end.
The following example suspends the SEM scheduler
temporarily.
Ruijie(config)#smart manager scheduler suspend
The following example restores the SEM scheduler.
Ruijie(config)#no smart manager scheduler suspend
Command
show smart
manager
scheduler
[occurs occurs-value]
Parameter
occurs occurs-value
occurs-period
occurs-period-value
Description
Show the SEM scheduler information.
[occurs-period
period-start-value]
Description
(optional) matching times needed
to trigger the entire policy. 1 by
default.
(optional) occurs invalid period,
the duration of occurs operation
over the period-value will be
considered to time out. This
parameter is invalid when the
occurs is 1.
occurs-period-value]
[correlate-period