Ruijie Networks RG-S2600E Series Cli Reference Manual page 1087

S2600E CLI Reference Guide
Related
commands
Platform
description
7.1.22 event cpp
This command is used to configure a CPP-based event in SEM configuration
mode. The no form of this command is used to delete an event with the
specified name.
event tag event-name [correlate {andnot | and | or}] cpp parameter
{counter-name | any} type {pps | total | drop} op operator value value [slot
{ slotid | mboard }] poll-interval poll-int-value
no event tag event-name
Parameter
description
Chapter 7 SEM Configuration Commands
Example 3: Clear the ARP buffer every 7200.
Ruijie(config)#intelligence manager applet Test_3
Ruijie(config-applet)#event tag monitor_timer timer
watchdog time 7200
Ruijie(config-applet)#action 00 cli command "enable"
Ruijie(config-applet)#action 10 cli command "clear
arp-cache"
Ruijie(config-applet)#commit
Ruijie(config-applet)#exit
Example 4: Clear route at 0 o'clock everyday.
Ruijie(config)#intelligence manager applet Test_4
Ruijie(config-applet)#event tag monitor_timer timer cron
cron-entry "0 0 * * *"
Ruijie(config-applet)#action 00 cli command "enable"
Ruijie(config-applet)#action 10 cli command "clear ip
route *"
Ruijie(config-applet)#commit
Ruijie(config-applet)#exit
Command Description
smart manager Define the command line based SEM
applet policy.
N/A
Parameter
event-name
Description
The event name