Working With The Memory Device - Leica MS50 User Manual

4.10


Insert and remove
an SD card
step-by-step
Insert and remove a
USB stick
step-by-step
MS50/TS50/TM50, Operation

Working with the Memory Device

• Keep the card dry.
• Use it only within the specified temperature range.
• Do not bend the card.
• Protect the card from direct impacts.
Failure to follow these instructions could result in data loss and/or permanent damage
to the card.
Step Description

The SD card is inserted into a slot inside the
Communication side cover of the instrument.
1. Press the button on the side of the Communication
side cover to unlock the communication compart-
ment.

The lid opens automatically.
2. Slide the SD card firmly into the SD slot until it
clicks into position.

The card must be held with the contacts at
the top and facing toward the instrument.

Do not force the card into the slot.
3. Close the lid by pushing the door down. Push the
door on the marked part in the middle of the door.
4. To remove the SD card, open the lid of the commu-
nication compartment and gently press on the top
of the card to release it from the slot.
Step Description

The USB stick is inserted into the USB host port
inside the Communication side cover of the instru-
ment.
1. Press the button on the side of the Communication
side cover to unlock the communication compart-
ment.

The lid opens automatically.
2. Slide the USB stick with the Leica logo facing you firmly into the USB host
port until it clicks into position.

Do not force the USB stick into the port.
3. Close the lid by pushing the door down. Push the door on the marked part
in the middle of the door.
4. To remove the USB stick, open the lid of the compartment and slide the USB
stick out of the port.
2
(4)
005017_001
2a
2b
(4)
005018_001
52