Working With A Usb Memory Stick - Leica TS03 User Manual

☞
12.4
☞
☞
☞
Insert a USB memory
stick step-by-step
170
4.
5. A message will display once the file or backup folder has been suc-
cessfully imported.
A '+', '-', '.' or alphanumerical characters should not be used as delimiter values
in ASCII files. These characters can also be part of the point ID or coordinate
values and if so, will generate errors where they occur in the ASCII file.

Working with a USB Memory Stick

Always return to the Main Menu before removing the USB memory stick.
Keep the USB memory stick dry.
•
• Use it only within the specified temperature range, -40°C to +85°C (-40°F
to +185°F).
Protect the USB memory stick from direct impacts.
•
Failure to follow these instructions could result in data loss and/or permanent
damage to the USB memory stick.
Whilst other USB memory sticks may be used, Leica Geosystems recommends
Leica industrial grade USB memory sticks and cannot be held responsible for
data loss or any other error that may occur when using a non-Leica USB mem-
ory stick.
2
0016342_001
1. Open the compartment lid.
2. The USB host port is located underneath the top edge of the com-
partment.
3. Insert the USB memory stick into the USB host port.
If the file is an ASCII file, the
Define ASCII Import screen will
appear. Define the delimiter
value, the units and the data
fields of the file and press Cont
to continue.
4 4
3 3
Data Management