Working With The Compactflash Card - Leica TS12P User Manual

4.8


Insert and remove a
CompactFlash card
step by step
TS12P, Operation

Working with the CompactFlash Card

• Keep the card dry.
• Use it only within the specified temperature range.
• Do not bend the card.
• Protect the card from direct impacts.
Failure to follow these instructions could result in data loss and/or permanent damage
to the card.
7
1
2
6
TPS12_016
Step Description
1. Face the instrument so that the vertical drive screw is on the left. The
CompactFlash card compartment is now on the right side of the instrument.
Turn the knob to the vertical position, opening the lid of the CompactFlash
card compartment.
2. Open the lid of the CompactFlash card compartment.
3. Pull the front of the CompactFlash card up and take the card out of the lid.
4. Place the lower end of the CompactFlash card at the lower end of the
CompactFlash card compartment. The extended edge of the card has to be
on the upper side as shown on the pictogram in the CompactFlash card
compartment.
5. Press the card down on the lid.
6. Close the lid.
7. Turn the knob to lock the CompactFlash card compartment. The lid is closed
correctly when the knob is turned to a horizontal position.
3
5
4
43