Enable Secret - Dell PowerConnect W-7200 Series Reference Manual

enable secret

enable secret
Description
This config mode command allows you to change the password for enable mode.
Usage Guidelines
Use this command to change the password for enable mode. To reset the password to the factory default of "enable",
use the
no enable
NOTE: The password must not contain a space and special characters.
Example
The following example allows you to change the password for enable mode.
(host) #configure terminal
Enter Configuration commands, one per line. End with CNTL/Z
(host) (config) #enable secret
Password:******
Re-Type password: ******
(host) (config) #
Command History
Version
ArubaOS 1.0
ArubaOS 3.3.2
Command Informatio
Platform
Available on all platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
command.
Modification
Command introduced
Updated with restriction of the secret phase
License
Available in the base operating system
Command Mode
Config mode on master or local
controllers
enable secret | 249