Save The Configuration; Changing The Master Ip Address - Avaya Communication Server 1000 Installation And Commissioning Manual

WLAN IP Telephony Manager 2245 configuration
IP Telephony Manager 2245 on the LAN. SendAll can only be used after the IP address
is configured on each WLAN IP Telephony Manager 2245 using a serial connection. If
identical configuration parameters are to be used for all WLAN IP Telephony Manager
2245 units, configure only the IP address and custom hostname (if desired) on each
WLAN IP Telephony Manager 2245 using the initial serial connection. Then connect
through the LAN to this WLAN IP Telephony Manager 2245 and use SendAll to transmit
identical configuration options of each field for all WLAN IP Telephony Manager 2245
units.
Important:
If SendAll is used on the system, all passwords must be identical. Do not change the
password at the initial configuration if the SendAll option is used. Use the default password
and change it globally, if desired, after a LAN connection is established for all WLAN IP
Telephony 2245 units.
If independent administration of each WLAN IP Telephony Manager 2245 is desired, the
passwords can be set during initial configuration.

Save the configuration

Reset the WLAN IP Telephony Manager 2245 in order to save the configuration parameters.
Follow the steps in
Saving the configuration
1. Press Esc on the keyboard.
2. Enter Y.
3. Alternatively, select the Reset option found in the SVP-II Configuration screen.

Changing the master IP address

To change the IP address of the master WLAN IP Telephony Manager 2245, change it in the
Network Configuration menu and reboot the system.
The alias IP addresses can now be changed in each of the other WLAN IP Telephony Manager
2245 units without incurring an error.
136 Avaya WLAN IP Telephony Installation and Commissioning
Saving the configuration
If the WLAN IP Telephony Manager 2245 is in Maintenance Lock, a prompt appears
asking if the configuration is to be saved.
Press Esc. See Configure the WLAN IP Telephony Manager 2245
on page 136 to save the configuration.
on page 138.
November 2010