Installation and configuration
Figure 25: DISPLAY STATUS (D S) (at local site) screen
Figure 26: DISPLAY STATUS (D S) (at remote site) screen
DISPLAY STATUS DISTANT (D S D)
This command displays the current condition of each link controlled by the distant-end mini-
carrier interface card. Its display is similar to
screen
on page 84 or
page 84.
ESAM [SAVE | FORCE | NEVER | AUTO]
The ESAM commands involve the Emergency Stand Alone Mode and how the user wishes it
to be invoked. If the user types an E and presses ENTER, the current ESAM setting and the
available settings will be displayed in a screen similar to
page 84. The commands are described in alphabetic order.
Note:
The ESAM SAVE command is reserved for future use.
Figure 27: ESAM (E) screen
84
Mini-Carrier Remote Fundamentals
Figure 26: DISPLAY STATUS (D S) (at remote site) screen
Comments? infodev@avaya.com
Figure 25: DISPLAY STATUS (D S) (at local site)
Figure 27: ESAM (E) screen
on
on
March 2013