Delayed Interrupt Module Registers - Fujitsu FR60 Hardware Manual

CHAPTER 11 REALOS-RELATED HARDWARE
11.1.2

Delayed Interrupt Module Registers

This section describes the configuration and functions of the registers used by the
delayed interrupt module.
■ Delayed Interrupt Module Register (DICR: Delayed Interrupt Module Register)
The delayed interrupt module register (DICR) controls delayed interrupts.
The bit configuration of the delayed interrupt module register (DICR) is shown below.
Bi
7
t
-
[Bit 0] DLYI
DLYI
0
1
This bit controls generation and clearing of the relevant interrupt source.
354
6 5 4 3
- - - -
A delayed interrupt source is cleared or no request exists. [initial value]
A delayed interrupt source is generated.
2 1 0
-------0
- - DLYI
[R/W]
Description
(initial value)
B