[Bit 1] RXE (Receiver Enable)
This bit controls the UART receive operation.
Value
Note:
If a receive operation is disabled while it is in progress (while data is being inputted to the receive
shift register), reception of the frame is completed. The receive operation is stopped when the
received data is stored in the receive data buffer register (SIDR).
[Bit 0] TXE (Transmitter Enable)
This bit controls the UART send operation.
Value
Note:
If a send operation is disabled while it is in progress (while data is being outputted from the
transmission register), sending is stopped when no more send data is stored in the send data buffer
register (SODR).
0
Disables receive operation. [initial value]
1
Enables receive operation.
0
Disables send operation. [initial value]
1
Enables send operation.
Meaning
Meaning
393