Fujitsu FR60 Hardware Manual page 377

■ Change Point Detection Data Register (BSDC)
Change point detection is performed for the written data.
The configuration of the change point detection data register (BSDC) is shown below.
000003F8
Read/write
Initial value
The initial value after a reset is undefined.
The read value is undefined.
Use a 32-bit length data transfer instruction for data transfer. (Do not use 8-bit or 16-bit length data transfer
instructions.)
■ Detection Result Register (BSRR)
0,1,or a change point is detected. What is detected depends on the data register that wrote date last.
The configuration of the detection result register (BSRR) is shown below.
000003FC
Read/write
Initial value
31
H
→ W
→ Undefined
31
H
→ R
→ Undefined
0
0
359