Fujitsu FR60 Hardware Manual page 77

Hide thumbs Also See for FR60:

Table of Contents

[Bit 2] Zero flag

This bit indicates whether the operation result is "0".

Indicates that the operation result is not "0".

Indicates that the operation result is "0".

The initial value after reset is undefined.

[Bit 1] Overflow flag

This bit indicates whether an overflow has occurred as a result of the operation when the operand using

the operation is regarded as an integer represented by its 2's complement.

Indicates that the operation result did not cause an overflow.

Indicates that the operation result caused an overflow.

The initial value after reset is undefined.

[Bit 0] Carry flag

This bit indicates whether a carry or a borrow has occurred from the most significant bit in the

Indicates that no carry or borrow has occurred.

Indicates that a carry or borrow has occurred.

The initial value after reset is undefined.

Mb91350a series