Fujitsu F2MC-8FX Series Operation Manual
Mcu board for mb95fv100-101
Hide thumbs
Also See for F2MC-8FX Series:
- User manual (110 pages) ,
- Application note (53 pages) ,
- Setup manual (30 pages)
Related Manuals for Fujitsu F2MC-8FX Series
Summary of Contents for Fujitsu F2MC-8FX Series
- Page 1 FUJITSU SEMICONDUCTOR SS01-26005-3E SUPPORT SYSTEM MC-8FX Family MCU BOARD for MB95FV100-101 MB2146-301 OPERATION MANUAL...
- Page 2 ■ Warranty and liability disclaimers The specifications of the product are subject to change without notice. In no event shall Fujitsu be liable for any loss or damages whatsoever directly or indirectly arising out of the use of the product.
- Page 3 ■ Caution of the products described in this document The following precautions apply to the product described in this manual. Indicates a potentially hazardous situation which, if not avoided appropriately, may result in minor or moderate injury and/or damage to the product or the equipment CAUTION to which the product is connected, to software resources such as data, or to other properties.
- Page 4 (i.e., submersible repeater and artificial satellite). Please note that FUJITSU will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products.
-
Page 5: Product Outline
1. Product Outline MB2146-301 is the MCU board (model number: MB2146-301) mounting an evaluation MCU in the MC-8FX Family of Fujitsu 8-bit microcontrollers. To build an F MC-8FX evaluation environment, combine three products: the header board, MCU board, and BGM adapter (model number: MB2146- 09). - Page 6 ■ Appearance and part name The appearance of a MCU board and the part name are shown in Figure 2. GNDVCC PRODUCT SELECT 1 2 3 4 1 2 3 4 ADAPTER Top view Bottom view 1 LVD2 detection voltage selector jumper plug 2 Voltage selector switch 3 Product selector switch 4 LVD selector switch...
- Page 7 3. Connections ■ Connecting the MCU board to the header board Align the MCU board the header board facing each other, then plug their mating connectors together. Those connectors are provided with incorrect insertion prevention guards located diagonally. Posi- tion the two boards correctly so that the incorrect insertion prevention guards do not interfere with each other and plug the connectors together completely (see “Figure 3”).
- Page 8 ■ Note on connection • Be sure to connect the BGM adapter connector (CN3) correctly. The BGM adapter connector and the LVD2 detection voltage selector jumper plug have the same shape (see “Figure 5”). The MCU board may break if the BGM adapter connector is accidentally plugged into the LVD2 detection voltage selector jumper plug (S2) on the other side of the board.
-
Page 9: How To Setup
4. How to Setup ■ How to the switch and jumper plug on a MCU board setup Please set the following switches referring to “Figure 6 The switch and jumper plug on a MCU board”. 1. Set the clock selector switch (SW1-1) to ON or OFF to disable or enable the subclock, respec- tively. - Page 10 ■ How to oscillator mounting on a MCU board Mount the crystal or ceramic oscillator into the crystal oscillator mounting sockets (for the main clock and subclock) on the MCU board. The MCU board has one crystal oscillator mounting socket for the main clock and the other for the subclock.
- Page 11 5. Setting of the Switch and Jumper Plug ■ Position of the switch and jumper plug The positions of the switch and jumper plug on a MCU board is shown in Figure 8, and specifications are shown in Table 3. GND VCC PRODUCT SELECT 1 2 3 4...
- Page 12 ■ Setting of the clock input selector switch (SW2) Figure 9 shows the clock input selector switch. Table 4 lists switch positions for main clock supply source. Table 5 lists switch positions and sub clock. 1 2 3 4 Figure 9 Clock input selector switch (SW2) Table 4 Setting of main clock supply source Settings of the clock input selector switch Main clock supply source...
- Page 13 ■ Setting of the subclock selector jumper plug (S1) Table 7 lists jumper plug positions and sub clock selection. Figure 10 shows the examples of sub- clock selection. Table 7 Setting of sub clock selector Settings of the sub clock selector Sub clock jumper plug (S1) Example...
-
Page 14: Product Specifications
6. Product Specifications ■ General specifications The general specifications of a MCU board is shown in Table 9. Table 9 General specifications Item Specification Name The MCU board for F MC-8FX MB95FV100-101 Model number MB2146-301 Evaluation MCU + 3.3 V (UVcc) (MB95FV100-101) Power supply + 3.3 V... - Page 15 Clock supervisor selector switch AVcc CSVEN APB8 bus output selector switch AVss Voltage selector APBEN switch AVcc3 LVDREXT AVR3 LVDEN selector switch LVDEN2 C-pin MB95FV100-101 selector Clock (evaluation MCU) switch selector circuit Header board X0,X1 Header board I/F connector X0A,X1A I/F connector Clock selector adapter...
- Page 16 ■ Connector socket specifications The specifications of a connector and a socket is shown in Table 11. Table 11 Connector and socket specifications Item Description Header board interface connector Connects the MCU board to a header board. BGM adapter connector Connects the MCU board to the BGM adapter.
- Page 17 ■ Pin assignment of header board I/F connector Tables 12 and 13 lists the pin assignments of the header board interface connector on the MCU board. Table 12 Pin assignment of header board I/F connector A Connector Evaluation Connector Evaluation Connector Evaluation Signal line...
- Page 18 Table 13 Pin assignment of header board I/F connector B Connector Evaluation Connector Evaluation Connector Evaluation Signal line Signal line Signal line MCU Pin MCU Pin MCU Pin name name name Number Number Number Number Number Number SEL0 SEL3 SEL4 SEL1 P04C AVcc3...
- Page 19 ■ Header board specifications Figure 14 shows recommended dimensions of the header board to connected to the MCU board. Table 14 lists general specifications of the header board. 20 mm Incorrect insertion prevention guard 13 mm MCU board I/F MCU board I/F connector B connector A 30 mm...
- Page 20 SS01-26005-3E FUJITSU SEMICONDUCTOR • SUPPORT SYSTEM MC-8FX Family MCU BOARD for MB95FV100-101 MB2146-301 OPERATION MANUAL July 2006 the third edition Published FUJITSU LIMITED Electronic Devices Edited Business Promotion Dept.