Service Parts Disassembly
REP 14.10 2nd BTR Contact Retract Motor Assy./ 2nd BTR Contact Retract
Motor
PL14.4.8/ PL14.4.10
8-158
Caution
Do not touch the Roll surface of the 2nd BTR Assembly.
1. Remove the Retract Shaft Assembly (REP 14.8,
2. Remove the wiring harness from the Harness Guide.
3. Remove 4 screws (silver, 6mm) that secure the 2nd BTR Contact Retract Motor
Assembly to the Left Hand Cover Assembly and remove the 2nd BTR Contact
Retract Motor Assembly.
page
8-153).
Phaser 7500 Printer Service Manual
s7500-219