Rep 12.18 Paper Feed Motor Assembly; Rep 12.19 Link Stopper - Xerox DocuPrint N2025 Service Manual

REP 12.18 Paper Feed Motor Assembly

Parts List on PL 12.3
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Right Side Cover (REP 12.5).
2. Remove the E-ring that secures the 47T gear (Figure 1). Remove the gear.
3. Remove the two screws that secure the motor to the Feeder Frame (Figure 1).
4. Remove the Paper Feed Motor Assembly.
5. Disconnect P/J609 from the Feed Motor Assembly (Figure 1).
Figure 1 Paper Feed Motor Assembly
Replacement
1. Reinstall the components in the reverse order.
Repair-Adjustment
REP 12.18, REP 12.19
WARNING

REP 12.19 Link Stopper

Parts List on PL 12.3
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Retard Assembly (REP 12.29).
2. Remove the 2000 Sheet Feeder Tray Assembly (REP 12.7).
3. Unhook the torsion spring from the Link Stopper (Figure 1).
4. Pull up on the locking tab and remove the Link Stopper (Figure 1).
5. Remove the Torsion Spring (Figure 1).
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-86
WARNING
Figure 1 Link Stopper
DocuPrint N2025/N2825
Initial Issue