Ip Dhcp Excluded-Address - Dell PowerConnect W-7200 Series Reference Manual

ip dhcp excluded-address

ip dhcp excluded-address <low-ipaddr> [<high-ipaddr>]
Description
This command configures an excluded address range for the DHCP server on the controller.
Syntax
Parameter
<low-ipaddr>
<high-ipaddr>
Usage Guidelines
Use this command to specifically exclude certain addresses from being assigned by the DHCP server. It is good
practice to exclude any statically assigned addresses.
Example
The following command configures an excluded address range:
ip dhcp excluded-address 192.168.1.1 192.168.1.255
Command History
Introduced in ArubaOS 3.0
Command Information
Platform
Available on all platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Low end of range of IP addresses. For example, you can enter the IP address of the controller so
that this address is not assigned.
High end of the range of IP addresses.
License
Available in base operating system
Command Mode
Config mode on master
controllers
ip dhcp excluded-address | 359