Defaults
none
Command Modes
DHCP <POOL>
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
excluded-address
Prevent the server from leasing an address or range of addresses in the pool.
C-Series, S-Series, Z-Series, S4810
Syntax
excluded-address [address | low-address high-address]
Parameters
address
low-address
high-address
Defaults
none
Command Modes
DHCP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
hardware-address
For manual configurations, specify the client hardware address.
C-Series, S-Series, Z-Series, S4810
Syntax
hardware-address address
Parameters
address
Defaults
none
Command Modes
DHCP <POOL>
Command History
Version 8.3.11.1
Version 8.3.7.0
656
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Enter a single address to be excluded from the pool.
Enter the lowest address in a range of addresses to be excluded from
the pool.
Enter the highest address in a range of addresses to be excluded
from the pool.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Enter the hardware address of the client.
Introduced on the Z9000.
Introduced on the S4810.