Udld Port; Udld Reset; Show Udld; Show Udld <Slot/Port - NETGEAR ProSafe M7100-24X User Manual

udld port

This command selects the UDLD mode operating on this interface. If the keyword
"aggressive" is not entered, the port operates in normal mode.
Default
normal
Format
udld port [aggressive]
Mode
Interface Config

udld reset

This command resets all interfaces that have been shutdown by UDLD.
Format
udld reset
Mode
Privileged EXEC

show udld

This command displays the global settings of UDLD.
Format
show udld
Mode
Privileged EXEC
Term Definition
Admin Mode
The global administrative mode of UDLD.
Message
The time period (in seconds) between the transmission of UDLD probe packets.
Interval
Timeout Interval
The time period (in seconds) before making decision that link is unidirectional.
show udld <slot/port>
This command displays the UDLD settings for the specified <slot/port>. If the "all" keyword is
entered, it displays information for all ports.
Format
show udld {< unit/slot/port> | all }
Mode
• Privileged EXEC
• User EXEC
Term Definition
Unit/Slot/Port
The identifying <unit/slot/port> of the interface.
Admin Mode
The administrative mode of UDLD configured on this interface. This is either "Enabled" or
"Disabled".
ProSafe Managed Switch
Utility Commands
611