Table of Contents
Advertisement
5. In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
Log in to the AV UI over the OOB port
You can configure network information on the IPv4 service port, also referred to as the
out-of-band (OOB) port. The OOB port is a dedicated Ethernet port for out-of-band
management of the switch. Traffic on this port is segregated from operational network
traffic on the switch ports and cannot be switched or routed to the operational network.
By default, no IP address is set for the OOB port, but its DHCP client is enabled so that
the port can receive an IP address from a DHCP server in your network.
If the OOB port does not receive an IP address from a DHCP server in your network,
the IP address for the port is set to 192.168.0.239 with 255.255.255.0 as the subnet
mask. The same occurs if you connect the OOB port directly to a computer and reboot
the switch.
For information about setting a fixed IP address for the OOB port, see Set a fixed IP
address for the OOB port on page 80.
To use IP address 192.168.0.239 of the OOB port to access the switch over the AV
UI:
1. Prepare your computer with a static IP address in the 192.168.0.0 subnet with subnet
mask 255.255.0.0.
For example, use 192.168.0.201 and 255.255.255.0 for your computer.
2. Connect an Ethernet cable from an Ethernet port on your computer to the OOB port
on the switch.
3. Reboot the switch so that the OOB port is set to its default IP address.
4. Launch a web browser.
5. Enter http://192.168.0.239 in the web browser address field:
The login page displays.
6. In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
Getting Started with the AV UI
AV Line of Fully Managed Switches M4250 Series
11
Audio Video User Manual
Advertisement
Table of Contents
