Show Radius Statistics - NETGEAR ProSafe GSM7248 User Manual

Layer 2 managed switch software version 4
Hide thumbs Also See for ProSafe GSM7248:
Table of Contents

Advertisement

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
IP Address
Port
Type
Secret Configured
Message Authenticator

show radius statistics

This command is used to display the statistics for RADIUS or configured server . To show the
configured RADIUS server statistic, the IP Address specified must match that of a previously
configured RADIUS server. On execution, the following fields are displayed.
Format
Mode
If ip address is not specified than only Invalid Server Address field is displayed. Otherwise other
listed fields are displayed.
Invalid Server Addresses
Server IP Address
Round Trip Time
Access Requests
Access Retransmission
Access Accepts
Access Rejects
Access Challenges
Malformed Access Responses
Security Commands
IP Address of the configured RADIUS server
The port in use by this server
Primary or secondary
Yes / No
Enables or disables. the message authenticator attribute for the selected
server
show radius statistics [ipaddr]
Privileged EXEC
The number of RADIUS Access-Response packets received from
unknown addresses.
IP Address of the Server.
The time interval, in hundredths of a second, between the most recent Access-
Reply | Access-Challenge and the Access-Request that matched it from the
RADIUS authentication server.
The number of RADIUS Access-Request packets sent to this server.
This number does not include retransmissions.
The number of RADIUS Access-Request packets retransmitted to this
RADIUS authentication server.
The number of RADIUS Access-Accept packets, including both valid and
invalid packets, which were received from this server.
The number of RADIUS Access-Reject packets, including both valid and
invalid packets, which were received from this server.
The number of RADIUS Access-Challenge packets, including both valid and
invalid packets, which were received from this server.
The number of malformed RADIUS Access-Response packets
received from this server. Malformed packets include packets with an invalid
202-10102-01, May 2005
9-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

7200 series

Table of Contents