Show Checkpoint Statistics; Clear Checkpoint Statistics - NETGEAR ProSafe GSM7224P User Manual

Format
initiate failover
Mode
Stack Global Config Mode

show checkpoint statistics

Use this command to display general information about the checkpoint service operation.
Format
show checkpoint statistics
Mode
Privileged EXEC
Term Description
Messages
Number of checkpoint messages transmitted to the backup unit. Range: Integer. Def
Checkpointed
ault:0
Bytes
Number of bytes transmitted to the backup unit. Range: Integer. Default:0
Checkpointed
Time Since
Number of days, hours, minutes and seconds since the counters were reset to zero.
Counters Cleared
The counters are cleared when a unit becomes manager and with a support command.
Range: Time Stamp. Default: 0d00:00:00
Checkpoint
Number of checkpoint messages per second. The average is computed over the time
Message Rate
period since the counters were cleared. Range: Integer. Default:0
Average
Last 10-second
Number of checkpoint messages per second in the last 10-second interval. This
Message Rate
average is updated once every 10 seconds. Range: Integer. Default:0
Average
Highest
The highest rate recorded over a 10-second interval since the counters were cleared.
10-second
Range: Integer. Default:0
Message Rate
Example:
(Switch)#show checkpoint statistics
Messages Checkpointed.....................6708
Bytes Checkpointed........................894305
Time Since Counters Cleared...............3d 01:05:09
Checkpoint Message Rate...................0.025 msg/sec
Last 10-second Message Rate...............0 msg/sec
Highest 10-second Message Rate............8 msg/sec

clear checkpoint statistics

This command clears the statistics for the checkpointing process.
Format
clear checkpoint statistics
Mode
Privileged EXEC
ProSafe Managed Switch
Stacking Commands
33