Remote Authentication Dial In User Service (Radius) Commands; Radius Accounting Mode; No Radius Accounting Mode; Radius Server Host - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Note that the login list associated with the 'admin' user can not be changed to prevent accidental
lockout from the switch.
Format
Mode
Remote Authentication Dial In User Service (RADIUS)
Commands
This section provides a detailed explanation of the RADIUS commands. The commands are
divided into the following groups:
• Configuration commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
• Show commands are used to display switch settings, statistics and other information.

radius accounting mode

This command is used to enable the RADIUS accounting function.
Default
Format
Mode

no radius accounting mode

This command is used to set the RADIUS accounting function to the default value - i.e. the
RADIUS accounting function is disabled.
Format
Mode

radius server host

This command is used to configure the RADIUS authentication and accounting server.
Security Commands
users login <user> <listname>
Global Config
disabled
radius accounting mode
Global Config
no radius accounting mode
Global Config
202-10102-01, May 2005
9-17