Software License Commands; Show Sflow Samplers - NETGEAR GSM7228PS Cli Manual

Datagram Version............................... 5
Maximum Datagram Size.......................... 1400

show sflow samplers

Use this command to display the sFlow sampling instances created on the switch.
Format
show sflow samplers
Mode Privileged EXEC
Field Description
Sampler Data The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support Physical
Source
ports only.
Receiver Index The sFlowReceiver configured for this sFlow sampler.
Packet Sampling The statistical sampling rate for packet sampling from this source.
Rate
Max Header Size The maximum number of bytes that should be copied from a sampled packet to form a
flow sample.

Software License Commands

Release 8.0.3 allows the switches (GSM73xxSv1 and GSM72xxPS) to be licensed such that this
switch can configure advanced features.
This following table lists the software license matrix for all GSM series of switches:
Switch
GSM73xxSv2
GSM72xxPS
GSM73xxSv1
Note: Software license will only be available on the Master unit if GSM72xxPS or GSM73xxSv1
is the Master of the stack. It will not be available in case GSM73xxSv2 is the Master of a
Stack.
Utility Commands
IPv4 Routing
Available
Licensed
Available
v1.0, July 2010
Managed Switch CLI Manual, Release 8.0.3
IPv6 Routing
Available
Licensed
Licensed
IP Multicast
Available
Licensed
Licensed
9-89