Reset Button; Factory Defaults Button; Usb Port - NETGEAR GS418TPP Hardware Installation Manual

Easy-Mount 16-Port Gigabit High Power PoE+ Smart Managed Pro Switch with 2 SFP Ports (240W)
All copper ports also support Power over Ethernet (PoE+).

Reset button

The switch provides a Reset button on the front panel so that you can reboot the switch.
Save the configuration before you press the Reset button.
To reboot the switch:
1. Insert a device such as a straightened paper clip into the opening.
2. Press the recessed Reset button.
The switch reboots.

Factory defaults button

The switch provides a Factory Defaults button on the front panel so that you can return
the switch to its factory default settings, causing all custom settings to be erased.
To return the switch to its factory default settings:
1. Insert a device such as a straightened paper clip into the opening.
2. Press the recessed Factory Defaults button for more than three seconds.
The switch reboots and returns to its factory default settings.

USB Port

The switch provides one USB 2.0 port that lets you upload firmware, upload or download
(back up) the configuration settings file, and download a memory dump (for debugging
purposes) using a USB device.
The USB storage device that you attach to the USB port must comply with the following
requirements:
• The USB device must support USB 2.0.
• The USB device must support the FAT32 or VFAT file type. The NTFS file type is not
supported.
Hardware Overview
Model GS418TPP
15 Hardware Installation Guide