Show Running-Config; Show Sysinfo - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Self
GMRP Learned
Other

18.1.8 show running-config

Use this command to display/capture the current setting of different protocol packages
supported on the switch. This command displays/captures commands with settings/
configurations that differ from the default value. To display/capture the commands with
settings/configurations that are equal to the default value, include the
The output is displayed in script format, which can be used to configure another switch
with the same configuration. If the optional
extension of ".scr", the output is redirected to a script file.
Format
Mode

18.1.9 show sysinfo

This command displays switch information.
Format
Mode
Switch
Description
System Name
System Location
System Contact
System ObjectID
18-16
The value of the corresponding instance is the address of one
of the switch's physical interfaces (the system's own MAC
address).
The value was learned via GMRP and applies to Multicast.
The value of the instance does not fall into one of the other
categories.
<scriptname>
show running-config [all | <scriptname>]
Privileged EXEC
show sysinfo
Privileged EXEC
Text used to identify this switch.
Name used to identify the switch.The factory default is blank.
To configure the system name, see
server" on page 10-1.
Text used to identify the location of the switch. The factory
default is blank. To configure the system location, see
10.1.1 "snmp-server" on page
Text used to identify a contact person for this switch. The fac-
tory default is blank. To configure the system location, see
Section 10.1.1 "snmp-server" on page
The base object ID for the switch's enterprise MIB.
v1.0, December 2005
option.
[all]
is provided with a file name
Section 10.1.1 "snmp-
10-1.
10-1.
System Maintenance Commands
Section