Show Process Cpu - NETGEAR GSM7228PS Cli Manual

Term Definition
Status The status of this entry. The meanings of the values are:
• Static—The value of the corresponding instance was added by the system or a user
when a static MAC filter was defined. It cannot be relearned.
• Learned—The value of the corresponding instance was learned by observing the source
MAC addresses of incoming traffic, and is currently in use.
• Management—The value of the corresponding instance (system MAC address) is also
the value of an existing instance of dot1dStaticAddress. It is identified with interface 0/
1. and is currently used when enabling VLANs for routing.
• Self—The value of the corresponding instance is the address of one of the switch's
physical interfaces (the system's own MAC address).
• GMRP Learned—The value of the corresponding was learned via GMRP and applies to
Multicast.
• Other—The value of the corresponding instance does not fall into one of the other
categories.
If you enter the interface <unit/slot/port> parameter, in addition to the MAC
Address and Status fields, the following field appears:
Term Definition
VLAN ID The VLAN on which the MAC address was learned.
The following information displays if you enter the count parameter:
Term Definition
Dynamic Number of MAC addresses in the forwarding database that were automatically learned.
Address count
Static Address Number of MAC addresses in the forwarding database that were manually entered by a
(User-defined)
user.
count
Total MAC Number of MAC addresses currently in the forwarding database.
Addresses in
use
Total MAC Number of MAC addresses the forwarding database can handle.
Addresses
available

show process cpu

This command provides the percentage utilization of the CPU by different tasks.
Utility Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
9-13