Show Mac-Addr-Table - NETGEAR ProSafe GSM7224P User Manual

Term Definition
Multicast
The total number of packets that higher-level protocols requested be transmitted to a
Packets
Multicast address, including those that were discarded or not sent.
Transmitted
Broadcast
The total number of packets that higher-level protocols requested be transmitted to the
Packets
Broadcast address, including those that were discarded or not sent.
Transmitted
Transmit
The number of outbound packets which were chosen to be discarded even though no
Packets
errors had been detected to prevent their being deliverable to a higher-layer protocol. A
Discarded
possible reason for discarding a packet could be to free up buffer space.
Most Address
The highest number of Forwarding Database Address Table entries that have been
Entries Ever
learned by this switch since the most recent reboot.
Used
Address Entries
The number of Learned and static entries in the Forwarding Database Address Table for
Currently in Use
this switch.
Maximum VLAN
The maximum number of Virtual LANs (VLANs) allowed on this switch.
Entries
Most VLAN
The largest number of VLANs that have been active on this switch since the last reboot.
Entries Ever
Used
Static VLAN
The number of presently active VLAN entries on this switch that have been created
Entries
statically.
Dynamic VLAN
The number of presently active VLAN entries on this switch that have been created by
Entries
GVRP registration.
VLAN Deletes
The number of VLANs on this switch that have been created and then deleted since the
last reboot.
Time Since
The elapsed time, in days, hours, minutes, and seconds, since the statistics for this
Counters Last
switch were last cleared.
Cleared

show mac-addr-table

This command displays the forwarding database entries. These entries are used by the
transparent bridging function to determine how to forward a received frame.
Enter all or no parameter to display the entire table. Enter a MAC Address and VLAN ID to
display the table entry for the requested MAC address on the specified VLAN. Enter the
count parameter to view summary information about the forwarding database table. Use the
interface <unit/slot/port> parameter to view MAC addresses on a specific
interface. Use the vlan <vlan_id> parameter to display information about MAC addresses
on a specified VLAN.
Format
show mac-addr-table [{<macaddr> <vlan_id> | all | count | interface
<unit/slot/port> | vlan <vlan_id>}]
Mode
Privileged EXEC
ProSafe Managed Switch
Utility Commands
510