Cli Command Logging Command; Logging Cli-Command; Configuration Scripting Commands; Section 18.4 "Cli Command Logging Command - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Number of Traps
Since Log Last
Viewed
Log
System Time Up
Trap

18.4 CLI Command Logging Command

This section describes the commands you use to configure CLI Command Logging.

18.4.1 logging cli-command

This command enables the CLI command logging feature, which enables the 7300 Series
Managed Switch software to log all CLI commands issued on the system.
Default
Format
Mode
18.4.1.1 no logging cli-command
This command disables the CLI command Logging feature.
Format
Mode

18.5 Configuration Scripting Commands

Configuration Scripting allows you to generate text-formatted script files representing the
current configuration of a system. You can upload these configuration script files to a PC
or UNIX system and edit them. Then, you can download the edited files to the system and
apply the new configuration. You can apply configuration scripts to one or more switches
with no or minor modifications.
18-26
Shows the number of new traps since the command was last
executed.
Shows the log number.
Shows how long the system had been running at the time the
trap was sent.
Shows the text of the trap message.
enabled
logging cli-command
Global Config
no logging cli-command
Global Config
v1.0, December 2005
System Maintenance Commands