Show Radius Accounting - NETGEAR ProSafe GSM7228PS Cli Manual

Server Name............................ Default_RADIUS_Server
Host Address........................... 192.168.37.58
Secret Configured...................... No
Message Authenticator ................. Enable
Number of Retransmits.................. 4
Time Duration.......................... 10
RADIUS Accounting Mode................. Disable
RADIUS Attribute 4 Mode................ Enable
RADIUS Attribute 4 Value .............. 192.168.37.60
(Switch) #show radius servers 192.168.37.58
Server Name............................ Default_RADIUS_Server
Host Address........................... 192.168.37.58
Secret Configured...................... No
Message Authenticator ................. Enable
Number of Retransmits.................. 4
Time Duration.......................... 10
RADIUS Accounting Mode................. Disable
RADIUS Attribute 4 Mode................ Enable
RADIUS Attribute 4 Value .............. 192.168.37.60

show radius accounting

This command displays a summary of configured RADIUS accounting servers.
Format
show radius accounting name [<servername>]
Mode Privileged EXEC
Field
servername
RADIUS Accounting
Mode
If you do not specify any parameters, then only the accounting mode and the RADIUS accounting
server details are displayed.
Term
Host Address
Management Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
Description
An alias name to identify the server.
A global parameter to indicate whether the accounting mode for all the servers is
enabled or not.
Definition
The IP address of the host.
v1.0, May 2010
8-62