Monitoring Subscriber Policy Rules - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

Monitoring Subscriber Policy Rules

Purpose
Action
Meaning
Copyright © 2010, Juniper Networks, Inc.
Display the set of forwarding and filtering rules for all subscriber policies configured on
the router, or for a specified subscriber policy.
To display the rules for a specified subscriber policy:
host1#show subscriber-policy client01
Subscriber: client01
ARP : Permit
Broadcast : Permit
Multicast : Deny
Unknown Destination : Deny
IP : Permit
Unknown Protocol : Permit
Unicast : Permit
PPPoE : Permit
Relearn : Deny
Mpls : Permit
To display the rules for all default and nondefault subscriber policies configured on the
router:
host1#show subscriber-policy
Subscriber: default Subscriber
ARP : Permit
Broadcast : Deny
Multicast : Permit
Unknown Destination : Deny
IP : Permit
Unknown Protocol : Permit
Unicast : Permit
PPPoE : Permit
Relearn : Permit
Mpls : Permit
Subscriber: default Trunk
ARP : Permit
Broadcast : Permit
Multicast : Permit
Unknown Destination : Permit
IP : Permit
Unknown Protocol : Permit
Unicast : Permit
PPPoE : Permit
Relearn : Permit
Mpls : Permit
Subscriber: client01
ARP : Permit
Broadcast : Permit
Multicast : Deny
Unknown Destination : Deny
IP : Permit
Unknown Protocol : Permit
Unicast : Permit
PPPoE : Permit
Relearn : Deny
Mpls : Permit
Table 126 on page 626 lists the show subscriber-policy command output fields.
Chapter 13: Monitoring VPLS
625