Danfoss iC7 Series Installation Manual
Pedestal kit for fk09/fb09 and fk10/fb10, frequency converters
Hide thumbs
Also See for iC7 Series:
- Application manual (382 pages) ,
- Design manual (224 pages) ,
- Operating manual (82 pages)
Table of Contents
Advertisement
Quick Links
Installation Guide
Pedestal Kit for FK09/FB09 and FK10/FB10
iC7 Series Frequency Converters
1 Overview
1.1 Description
The pedestal kit is intended for floor-mounted FK09/FB09 and FK10/FB10 frequency converters. A pedestal and a cable entry plate
are required for proper operation of the frequency converter. The pedestal features a front grill to allow proper airflow for cooling.
Reuse the cable entry plate that ships with the frequency converter to maintain the IP21/Type 1 or IP54/Type 12 protection rating.
1.2 Kit Numbers
Use these instructions with the following kits.
Table 1: Pedestal Kits for FK09-FK10/FB09-FB10 Frequency Converters
Number
Description
176F4034
400 mm (15.7 in) pedestal kit for FK09a/FB09a frequency converters
176F4035
400 mm (15.7 in) pedestal kit for FK10a/FB10a frequency converters
176F4036
200 mm (7.9 in) pedestal kit for FK09c/FB09c frequency converters
1.3 Items Supplied
The following parts are contained in the kit.
Table 2: Items Supplied in Pedestal Kits
Item
Pedestal base
Front cover
Upper front flange
Lower front flange
Side plate
M5x18 screw
M10 hex nut
M8 hex nut
M5x14 countersunk screw
Danfoss A/S © 2022.03
Quantity
1
1
1
1
2
6
2
4
12
AN371942906358en-000101 / 136R0256 | 1
Advertisement
Table of Contents
Related Manuals for Danfoss iC7 Series
Summary of Contents for Danfoss iC7 Series
- Page 1 Installation Guide Pedestal Kit for FK09/FB09 and FK10/FB10 iC7 Series Frequency Converters 1 Overview 1.1 Description The pedestal kit is intended for floor-mounted FK09/FB09 and FK10/FB10 frequency converters. A pedestal and a cable entry plate are required for proper operation of the frequency converter. The pedestal features a front grill to allow proper airflow for cooling.
- Page 2 N O T I C E ELECTROSTATIC DISCHARGE Electrostatic discharge can damage components. Ensure discharge before touching internal frequency converter components, for example by touching a grounded, conduc- tive surface or by wearing a grounded armband. 2 | Danfoss A/S © 2022.03 AN371942906358en-000101 / 136R0256...
- Page 3 Illustration 1: Overview of Pedestal Kit Pedestal base Side plate M10 hex nut Front cover Upper front flange M5x14 countersunk screw M8 hex nut Lower front flange M5x18 screw M5x14 countersunk screw Danfoss A/S © 2022.03 AN371942906358en-000101 / 136R0256 | 3...
- Page 4 Procedure Position the frequency converter on the pedestal base. Secure 2 M10 nuts over the threaded studs at the back of the pedestal, securing the pedestal to the frequency converter. 4 | Danfoss A/S © 2022.03 AN371942906358en-000101 / 136R0256...
- Page 5 To install the cable entry plate, use the following steps. Refer to Illustration Create cable entry holes in the plate using a sheet metal punch. Insert the cable entry plate using 1 of the following methods: Danfoss A/S © 2022.03 AN371942906358en-000101 / 136R0256 | 5...
- Page 6 Attach the front cover to the pedestal by securing 4 M5x14 countersunk screws. Illustration 4: Cable Entry Plate and Pedestal Cable entry plate Side panel Front cover M5 x14 countersunk screw 6 | Danfoss A/S © 2022.03 AN371942906358en-000101 / 136R0256...
- Page 7 Pedestal Kit for FK09/FB09 and FK10/FB10 Installation Guide Installation Danfoss A/S © 2022.03 AN371942906358en-000101 / 136R0256 | 7...
- Page 8 Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or function of the product.
Need help?
Do you have a question about the iC7 Series and is the answer not in the manual?
Questions and answers