Honda Accord 2008 Manual page 2205

07/11/02 09:35:02 61TA0000_220_0175
Keyless/Power Door Locks/Security System
Door Lock Knob Switch Test
Driver's Door
1. Remove the driver's door panel (see page 20-16).
2. Disconnect the 10P connector (A) from the door
lock actuator (B).
＊０１
B
A
3. Check for continuity between the terminals.
• There should be continuity between the No. 6
and No. 5 terminals when the door lock knob
switch is in the LOCK position and no continuity
when the switch is in the UNLOCK position.
• There should be continuity between the No. 7
and No. 5 terminals when the door lock knob
switch is in the UNLOCK position and no
continuity when the switch is in the LOCK
position.
4. If the continuity is not as specified, replace the door
lock actuator.
22-172
Passenger Doors (With Security)
1. Remove the passenger's door panel.
• Front (see page 20-16)
• Rear (see page 20-35)
2. Disconnect the 10P connector (A) from the door
lock actuator (B).
Front passenger's
door, Right
rear door
Left rear door
3. Check for continuity between the terminals.
There should be continuity between the No. 8
［ No. 7 ］ and No. 10 ［ No. 5
door lock knob switch in the UNLOCK position and
no continuity when the switch is in the LOCK
position.
［ ］
: Left rear door
4. If the continuity is not specified, replace the door
lock actuator.
ＴＡ０８Ａ００Ｊ４６６４３４２１０１１ＦＥＡＴ００
B
A
］ terminals when the
＊０２