Honda Accord 2008 Manual page 2200

07/11/02 09:35:00 61TA0000_220_0170
Door Multiplex Control Unit
11. Turn the ignition switch to LOCK (0), and open and close the driver's door, then remove the power window master
switch.
• 2-door (see page 22-283)
• 4-door (see page 22-283)
12. Disconnect the 37P connector from the door multiplex control unit.
＊０３
13. Inspect the connector and socket terminals to be sure they are all making good contact.
• If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.
• If the terminals look OK, go to step 14.
DOOR MULTIPLEX CONTROL UNIT 37P CONNECTOR
WHT LT GRN
BRN YEL
BLU ORN
BRN
Wire side of female terminals
BLK BLK
PNK
WHT BLU
(cont'd)
22-167