Replacing Gearbox Axis 3 - ABB IRB 6640 Foundry Prime Product Manual

4.7.3 Replacing gearbox axis 3

Introduction
This section describes how to replace gearbox axis 3.
This section consist of the following parts:
Product manual - IRB 6640 Foundry Prime
3HAC040586-001 Revision: N
• Removal of gearbox axis 3 on page 422
• Preparations of lower arm before refitting of gearbox axis 3 on page 424
• Preparations of upper arm before refitting of gearbox axis 3 on page 425
• Preparations of spare part before the refitting on page 426
• Refitting gearbox axis 3 on the upper arm on page 427
• Refitting the upper arm on page 428
• Concluding refitting procedure on page 429
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.7.3 Replacing gearbox axis 3
Continues on next page
419