ABB IRB 6640 Foundry Prime Product Manual page 319

2
3
4
5
Product manual - IRB 6640 Foundry Prime
3HAC040586-001 Revision: N
Action
Apply rust protection (Mercasol) on the
machined surface.
Apply rust protection (Mercasol) on the
machined surfaces of the piston rod ear.
Cut the paint with a knife in the joint
between the rear cover and the balancing
unit housing.
Remove the cover with the air nipple.
© Copyright 2011-2018 ABB. All rights reserved.
4.5.4.2 Replacing balancing device (design 2)
Note
For art. no. see:
• Additional equipment - Foundry
Prime on page 314
xx1000000628
• A: Mercasol
For art. no. see:
• Additional equipment - Foundry
Prime on page 314
xx1000000629
• A: Mercasol
The figure shows the principal method.
xx0900000121
Note
Keep the cover for refitting on the new
balancing unit.
Continues on next page
4 Repair
Continued
319