Apply Mercasol On Output Shaft Axis 3 - ABB IRB 6640 Foundry Prime Product Manual

3 Maintenance

3.6.6 Apply Mercasol on output shaft axis 3

3.6.6 Apply Mercasol on output shaft axis 3
Location of the gear axis 3
The gear axis 2 is located as shown in the illustration.
xx1500001667
Required tools and equipment
Equipment
Brush
Required consumables
Consumable
Rust preventive
Procedure
The procedure describes how to remove and apply rust preventive output shaft
axis 3.
1
Continues on next page
208
Action
Put the robot in a suitable position.
© Copyright 2011-2018 ABB. All rights reserved.
Article number Note
Article number Note
3HAC034903-001 Equivalent:
•
Note
Product manual - IRB 6640 Foundry Prime
Mercasol
3HAC040586-001 Revision: N