ABB IRB 6640 Foundry Prime Product Manual page 160

3 Maintenance
3.3.12 Inspecting the axis-1 mechanical stop pin
Continued
Inspecting, mechanical stop pin
Use this procedure to inspect the axis-1 mechanical stop pin.
1
2
160
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
to the robot, before entering the robot working
area.
Inspect the axis-1 mechanical stop pin.
If the mechanical stop pin is bent or damaged, it
must be replaced.
Note
The expected life of gearboxes can be reduced
after collision with the mechanical stop.
© Copyright 2011-2018 ABB. All rights reserved.
Note
Product manual - IRB 6640 Foundry Prime
3HAC040586-001 Revision: N